Sychem Control

Why use Sychem Control?

dual surface cleaner disinfectant

Sychem Control surface cleaner is a high-level dual cleaner disinfectant chemical solution offering safe, effective, user-friendly single step cleaning and disinfection across a wide range of industries and applications. From healthcare to laboratories, food processing to veterinary science, Sychem Control is a proven solution safe to use in all associated food, animal, and human environments.

The Control Technology™ platform is based around the quaternary ammonium compounds didecyldimethyl ammonium chloride (DDAC) and benzalkonium chloride (BAC) with an adjuvant effect to enhance its antimicrobial efficacy. Sychem Control surface cleaner kills 99.999% of bacteria and destroys enveloped viruses (such as COVID-19) and non-enveloped viruses within minutes of contact.

Our most popular products

Sychem Control Concentrate

Fluid concentrate

  • 5 litre container 
 
  • Complimentary pelican pump included
 
  • Ideal for onsite dilution and use within a sprayer/atomiser spray
 
  • Dilution 1:84. (Control : Water)
 
  • Product Code: SYC-020152-C
 
      Download our MSDS here
 

Sychem Control RFU Trigger Spray

Ready-to-use trigger spray 

  • Available in 500ml/750ml/1000ml
 
  • Triggers included with purchase
 
  • Ideal for distribution throughout your facility or department
 
  • No dilution required
 
  • Product Codes: SYC-4200500-C, SYC-42-007506-C & SYC-42001L-C
 
      Download our MSDS here

Sychem Control RFU Surface Wipes

Ready-to-use surface wipes

  • 100 wipes per pack 
 
  • Size: 200mm x 200mm / wipe
 
  • Ideal for distribution throughout your facility or department
 
  • Ready to use surface wipes 
 
  • Product Code: SYC-451020010-C
 
      Download our MSDS here

Healthcare

Sychem Control surface cleaner is ideal for use within a healthcare setting because it is safer than traditional disinfectants due to its low level of biocide combined with its adjuvant technology platform which maximise the efficacy of its microbial kill rate.

Sychem Control offers exceptional log reduction performances, it is fragrance free, can be supplied in multiple applicators and is a dual cleaner & disinfectant so it is suitable for all surface types and substrates with no detrimental micro cracking or crazing meaning it is ideal for specialist floor types, walls, patient monitoring equipment, beds, mattresses, medical devices and more.

Read more

Laboratory

 Sychem Control surface cleaner is ideal for use within a laboratory because it is safer than traditional disinfectants due to its low level of biocide combined with its adjuvant technology platform which maximise the efficacy of its microbial kill rate.

Sychem Control offers exceptional log reduction performances, it is fragrance free, can be supplied in multiple applicators and is a dual cleaner & disinfectant so it is suitable for all surface types and substrates with no detrimental micro cracking or crazing meaning it is ideal for specialist floor types, walls, plastics, glassware and for decontaminating surfaces within a BLS2, BLS3 and BLS4 facility. Sychem Control can be used within dunk tanks and is approved for use on Dycem floor mats.

Read more

Life Science

Sychem Control protects your animals by creating an anti-microbial barrier that offers up to 4 weeks persistence.

Sychem Control is ideal for use in Animal facilities because it is safer than traditional disinfectants due to its low level of biocide combined with its adjuvant technology platform which maximise the efficacy of its microbial kill rate.

Sychem Control offers exceptional log reduction performances, it is fragrance free, can be supplied in multiple applicators and is a dual cleaner & disinfectant so it is suitable for all surface types and substrates with no detrimental micro cracking or crazing meaning it is ideal for specialist floor types, walls, change stations, caging, IVC’s, air plenums etc. Sychem control can be used within dunk tanks and is approved for use on Dycem floor mats.


Additionally, Sychem Control effectively removes bio-films so is ideal for use on aquatic tanks.

 

Read more

Why choose Sychem Control surface cleaner?

Dual cleaning capabilities 

Sychem Control surface cleaner is a dual cleaner disinfectant meaning there is no need to pre-clean a surface prior to its use, saving money on detergents and on a 2 step cleaning process. Note: not cleaning prior to the application of a disinfectant causes detrimental impact to the disinfectants microbial efficiency.

HPA tested

Sychem Control stays persistent on a surfaces for up to 4 weeks following application, this is as tested by the HPA and enables a higher and increased level of protection to be built up on a surface over time.

Limited microbial resistance

Due to its adjuvant technology platform Sychem Control does not suffer from microbial resistance. 

Accelerated performance

Sychem Control surface cleaner utilises an adjuvant technology platform which accelerates the performance of its active ingredients to minimise its hazardous content & labelling to offer increased safety during use.

For use on all surfaces

Sychem Control is chlorine free and compatible with all surfaces and has been tested for use on board aircraft by Boeing. This means aluminium’s, plastics, metalics, floors, walls and fabrics are all unaffected by the use of this product.

Low cross infection risk 

Repeated use enables the product to build up a protective microbial barrier on the skins surface minimising cross infection risk.

No hazardous identification

Our hazardous warning identification is only carried on our concentrate and is identified by an exclamation mark. Our product in diluted form carry’s no hazardous warning identification symbol making it safer to use and apply. Whilst in diluted form it carries no hazardous symbols but it is still classified as a disinfectant and attention must be drawn to the products MSDS and instructions for use. 

Why choose Sychem Control surface cleaner?

Dual cleaning capabilities 

Sychem Control surface cleaner is a dual cleaner disinfectant meaning there is no need to pre-clean a surface prior to its use, saving money on detergents and on a 2 step cleaning process. Note: not cleaning prior to the application of a disinfectant causes detrimental impact to the disinfectants microbial efficiency.

HPA tested

Sychem Control stays persistent on a surfaces for up to 4 weeks following application, this is as tested by the HPA and enables a higher and increased level of protection to be built up on a surface over time.

Limited microbial resistance

Due to its adjuvant technology platform Sychem Control does not suffer from microbial resistance. 

Accelerated performance

Sychem Control surface cleaner utilises an adjuvant technology platform which accelerates the performance of its active ingredients to minimise its hazardous content & labelling to offer increased safety during use.

For use on all surfaces

Sychem Control is chlorine free and compatible with all surfaces and has been tested for use on board aircraft by Boeing. This means aluminium’s, plastics, metalics, floors, walls and fabrics are all unaffected by the use of this product.

Low cross infection risk 

Repeated use enables the product to build up a protective microbial barrier on the skins surface minimising cross infection risk.

No hazardous identification

Our hazardous warning identification is only carried on our concentrate and is identified by an exclamation mark. Our product in diluted form carry’s no hazardous warning identification symbol making it safer to use and apply. Whilst in diluted form it carries no hazardous symbols but it is still classified as a disinfectant and attention must be drawn to the products MSDS and instructions for use. 

Can't find what you are looking for?

Contact us today for our full range of chemical solutions